••State-of-the-art, fully solid-state kWh meter with 800 pulse per kWh pulse output

••1% accuracy, LCD readout in hundredths of a kWh, to 99999.99 kWh. No conversion factor or multiplier.

••Compact, very easy to install design. Simple DIN-rail mounting. Wires pass through 3/8+” diameter tubes in the meter body--Will accept #2AWG insulated wire. The only electrical connection is made by 2 small screws which penetrate the wire insulation and pick up power--less than 1 watt--to power the meter.

••Non-resettable LCD display. Usage data is maintained through power outages.

••Installation instructions:  http://kwhmeters.com/ekm_installation.pdf

••Single-phase energy meter for either:

•••100A 120/208 to 240-volt 3-wire 60Hz • Standard North American household current. Most commonly a white neutral, a black “hot” and a red “hot” wire, 200V to 252V between the “hots”, 110V to 126V either “hot” to neutral.

•Model EKM-25IDS

$90

OR

•••50A 120-volt 2-wire 60Hz • Most commonly a white neutral and a black or red “hot” wire, 110V to 126V between them.

•Model EKM-15IDS

$90

dbrouwer@ekmmetering.com