EKM-25EDS-N v.2

••Model EKM-25EDS-N v.2

••New software for your PC, Mac or Linux computer--Read your meters from anywhere in the world!!

••External current transformer (CT) meter with enhanced metering capability. Now you can monitor Voltage, Amperage, Power, Power Factor, and Reverse Current (very useful for many photovoltaic installations!)

••On-board storage of 6 months of monthly readings!! Time-of Use recording for multiple time periods and seasons!!

••CTs are available in both solid-core (non-openable) and split-core (openable) versions, 200Amp capacity.

••Updated software to take advantage of the increased capability!

••Read One or 30 meters from across town or across the world! Complete Plug-N-Play package available.

••These kWh meters are an elegant combination of simplicity and sophistication.

••State-of-the-art electronic design with on-board data storage and built-in networking capability.

••Compact, very easy to install design. Convenient DIN-rail mounting. Electrical wires pass through donut-shaped current transformers (CTs), or CTs clamp around the wires. This allows meters to be mounted up to 6 feet from the CT location. Separate power connection (same voltage as meter, less than 1 watt) needed to power the meter.

••Non-resettable LCD display. Usage data is maintained through power outages.

••Available 120V, 2-wire, 60Hz; 120/240V, 3-wire, 60Hz; and now for the rest of the world!! 230V, 50Hz, 2-Wire

•••200/400A, 120/240-volt, 3-wire, 60Hz • Standard North American household current. Most commonly a white neutral, a black “hot” and a red “hot” wire, 200V to 252V between the “hots”, 100V to 126V either “hot” to neutral. Very voltage tolerant--the meters will tolerate voltages from 168 V to 312V hot to hot, 84V to 156V hot to neutral !!

Requires TWO CTs.

•Model EKM-25EDS-N v.2 $140 without CTs

•Model EKM-25EDS-N v.2 with two 13mm Split-Core CTs $220

3 inch DIN-rail piece for mounting $2

••Purchase Single-phase energy meters

dbrouwer@ekmmetering.com