••Model EKM-25IDS-N v.2


••New!! Version 2. Smarter than ever. Read kWh, Reverse kWh, Voltage, Current (Amps), Power (kW), Power Factor (Cos ϴ). Also, 6 months of monthly reads with Time-of-Use stored on board the meter and readable remotely.


••Read One or 30 meters from across town or across the world! Complete Plug-N-Play package available.


••These kWh meters are an elegant combination of simplicity and sophistication.


••State-of-the-art electronic design with on-board data storage and built-in RS-485 networking capability--Simple,

2-wire daisy chain connection.


••Same specifications as the Basic but with the addition of “Smart” capability.


••Compact, very easy to install design. Convenient DIN-rail mounting. Wires pass through 3/8+” diameter tubes in the meter body--Will accept #2AWG insulated wire. The only electrical connection is made by 2 small screws which penetrate the wire insulation and pick up power--less than 1 watt--to power the meter.


••Non-resettable LCD display. Usage data is maintained through power outages.


••Installation instructions:  http://kwhmeters.com/ekm_installation.pdf

 

••Single-phase energy meter for 120/240 Volt, 3-wire


•••100A 120/208 to 240-volt 3-wire 60Hz • Standard North American household current. Most commonly a white neutral, a black “hot” and a red “hot” wire, 200V to 252V between the “hots”, 110V to 126V either “hot” to neutral. Very voltage tolerant--the meters will tolerate voltages from 168 V to 312V hot to hot, 84V to 156V hot to neutral !!



•Model EKM-25IDS-N v.2


$140



3 inch DIN-rail piece for mounting         $2


dbrouwer@ekmmetering.com